Covid 19 Products And Kits

Product Details:

Coviself  is an in vitro diagnostic test for the qualitative detection of COVID-19 antigen in nasal swab specimen directly from individuals with or without symptoms or with other epidemiological reasons to suspect COVID-19.

The user will get the test results within 20 minutes from the safety of their own house. The test reports can be checked using the MyLab app. Both testing materials, a guidelines for use (IFU) leaflet, and a biohazard bag to properly dispose of test materials will be included with each package. To minimise pain, the procedure is intended to be performed using a nasal swab rather than a deep nasopharyngeal swab.

Uses:
The Rapid Antigen Self Test kit allows the user to get himself/herself tested at home without any discomfort.

Directions For Use :
Test preparation:

• Wash your hands and zxc make sure they are dry before starting the test procedure

• Tear the pouch and keep the individual components ready for testing

• Open the MyLab Coviself app and fill in the credentials (All fields are mandatory as per ICMR)

• Open the pouch containing the test device(cassette)

• Scan the OR code on the cassette to link the code with your credentials

How to Use:

• Find the pre-filled buffer tube and remove it out of the pouch and tap vertically on the horizontal surface, to make sure the extraction buffer settles at the bottom of the tube

• Unscrew the cap and hold the tube in your hand. Do not spill the content of the tube

Step 1: Open the swab package from the tail end and take the swab out (Do not touch the swab head)

Sampling with a nasal swab:

• Using the sterile swab provided in the kit, carefully insert the swab into one nostril. The swab tip should be inserted up to 2-4cm or until resistance is met

• Roll the swab 5 times inside the nostril to ensure that cells are collected

• Using the same swab, repeat this process for the other nostril to ensure that an adequate sample is collected from both the nasal cavities

• Withdraw the swab from the nasal cavity. The specimen is now ready for testing using the extraction buffer provided in the test kit

Step 2:

• Take the nasal swab and dip in the pre-filled extraction tube. Pinch the tube at the bottom and swirl the nasal swab 10 times ensuring the swab is immersed well in the extraction buffer

• Find the breakpoint of the swab. Break the swab at the breakpoint. Discard the remainder of the swab. Mix well

Step 3:

• Do not leave the test device unused once opened for more than 5 minutes. Add 2 full drops of extracted antigen buffer mixture into the sample well of the test device, by pressing the tube and wait for 10-15min for the results to appear

• Read the results within 20 minutes. Strong positive results can be reported within 10-15 minutes. Results that appear after 20 minutes are not valid (Phone will give you the alarm to capture the test results)

Step 4:

• Take the test device and click a picture (Wait for the app to analyse and display your COVID-19 test results)

• The swab is inserted in the lysis buffer which destroys the COVID-19/respiratory viruses. This tube (with swab head inside), is to be put inside the waste disposal bag and this bag can be thrown in the household waste

Additional Information:

• Item Code: 000201
• Production Capacity: 100000
• Delivery Time: 10-15 working days